Waeco CFX35, Operating Manual

Page: 36 / 296

EN
Operation CFX35 – CFX65DZ
36
I
NOTE
Place the cooler as shown (fig.
1
, page 3). If you operate the box
in a different position it can be damaged.
➤
Connect the cooler, see “Connecting the cooler” on page 33.
A
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
➤
Press the “ON/OFF” button (fig. 3 1, page 3) for between one
and two seconds.
✓
The LED “
P
” lights up (fig. 3 2, page 3).
✓
The display (fig. 3 5, page 3) switches on and shows the
current cooling temperature.
I
NOTE
Displayed temperature
CFX 35, CFX 40, CFX 50, CFX 65:
The temperature displayed is that of the middle of the large interior
compartment.
CFX 65DZ:
– With fridge/freezer divider in: The temperature displayed is
that of the middle of the freezer compartment.
– With fridge/freezer divider out: The actual compartment tem-
perature will be considerably warmer than the displayed
temperature.
All models:
Temperatures elsewhere in the compartment (away from centre)
will deviate from displayed temperature.
✓
The cooler starts cooling the interior.
I
NOTE
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED “
P
” flashes orange.
Latching the cooler lid
➤ Close the lid.
➤
Press the latch (fig. 2 1, page 3) down, until it latches in
place audibly.