Waeco CFX35, Operating Manual

Page: 37 / 296

EN
CFX35 – CFX65DZ Operation
37
6.6 Setting the temperature
➤
Press the “SET” button (fig. 3 4, page 3) once.
➤
Use the “UP +” (fig. 3 7, page 3) and “DOWN -” (fig. 3 6,
page 3) buttons to select the cooling temperature.
✓
The cooling temperature appears in the display for a few
seconds. The display flashes several times and then the current
temperature is displayed again.
6.7 Using the emergency switch (where fitted)
The emergency switch (fig. 5 1, page 4) is located below the con-
trol panel. For normal operation the switch is in the “NORMAL USE”
position.
➤
If an electronic control failure occurs, slide the switch to
“EMERGENCY OVERRIDE” position
I
NOTE
If the switch is in the “EMERGENCY OVERRIDE” position, the
cooler freezes with full cooling capacity.
6.8 USB port for power supply
USB port allows you to charge small devices like mobile phones
and mp3-players.
To use your cooling box with any USB devices, simply connect a
USB cable (not included) to your device.
I
NOTE
Ensure that any small device connected to the USB port is
compatible with 5 V/500 mA operation.
6.9 Switching off the cooler
➤ Empty the cooler.
➤ Switch the cooler off.
➤ Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤
Leave the cover slightly open. This prevents odour build-up.