Waeco CFX35, Operating Manual

Page: 38 / 296

EN
Operation CFX35 – CFX65DZ
38
6.10 Defrosting the cooler
Humidity can form frost in the interior of the cooling device or on the
evaporator. This reduces the cooling capacity. Defrost the device
in good time to avoid this.
A
NOTICE! Danger of damage!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooler, proceed as follows:
➤ Take out the contents of the cooling device.
➤
If necessary, place them in another cooling device to keep them
cool.
➤
Switch off the device.
➤
Leave the lid open.
➤
Wipe off the defrosted water.
6.11 Replacing the device fuse
D
DANGER! Danger of electrocution!
Disconnect the connection cable before you replace the device
fuse.
➤
Pull off the connection cable.
➤
Pry out the fuse insert (fig. 4 2, page 4) with a screwdriver.
➤
Replace the defective fuse with a new one that has the same
rating (T4AL 250V).
➤
Press the fuse insert back into the housing.
6.12 Replacing the plug fuse (12/24 V)
➤
Turn anticlockwise the cap (fig. 7 1, page 5) to move it and pin
(fig.
7
2, page 5) from the plug.
➤ Press one end of the fuse (fig.
7
3, page 5) and take it out.
➤ Replace the defective fuse with a new one that has the same
rating (10 A).
➤
Re-assemble the plug in the reverse order.