Operation
35
I
Note
If you wish to operate the cooler from the AC mains, set the battery
monitor to the “LOW” position.
a
Caution – Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
➤
Press the “ON/OFF” button (fig.
2
1, page 3) for between one
and two seconds.
✓
The “POWER” LED lights up.
✓
The display (fig.
2
5, page 3) switches on and shows the
current cooling temperature.
I
Note
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
✓
The cooler starts cooling the interior.
I
Note
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED “POWER” flashes
orange.
6.6
Setting the temperature
➤
Press the “SET” button (fig.
2
4, page 3) once.
➤
Use the “UP +” (fig.
2
6, page 3) and “DOWN -” (fig.
2
7,
page 3) buttons to select the cooling temperature.
✓
The cooling temperature appears in the display for a few
seconds. The display flashes several times and then the current
tempera-ture is displayed again.
_CF-80_110.book Seite 35 Freitag, 11. September 2009 3:45 15
www.busse-yachtshop.de | [email protected]
