Operation
32
e
Warning - Danger of damaging the device!
To avoid drops in voltage and therefore performance, keep the ca-
ble as short as possible and only disconnect it when necessary.
For this reason avoid additional switches, plugs or power strips.
➤
Determine the required cross section of the cable in relation to
the cable length according to fig.
6
, page 5.
Key for fig.
6
, page 5
e
Warning - Danger of damaging the device!
Make sure that the polarity is correct.
➤
Before starting up the device for the first time, check whether
the operating voltage and the battery voltage correspond (see
type plate).
➤
Make sure that the cable at the positive battery terminal
(fig.
7
2, page 5) is protected with a 15 A fuse (fig.
7
3,
page 5).
➤
Plug the 12/24-V connection cable (fig.
1
2, page 3) into the
DC socket on the cooler (fig.
7
1, page 5).
➤
Connect the red cable (fig.
7
rt, page 5) to the positive terminal
of the battery (fig.
7
2, page 5).
➤
Connect the black cable (fig.
7
sw, page 5) to the negative
terminal of the battery (fig.
7
2, page 5).
Co-ordinate axis
Meaning
Unit
l
Cable length
m
∅
Cable cross section
mm²
_CF-80_110.book Seite 32 Freitag, 11. September 2009 3:45 15
www.busse-yachtshop.de | [email protected]
