Tape Installation
(For additional information on die-cut tape see page 8)
.
7
Note:
It should not be necessary to disturb the
tape alignment sensor if you are
replacing tape of the same size.
Moving the sensor out of position could
cause the auto sensing feature of the
Laundryprint to fail.
Note the core holder is stepped
for altering label roll heights.
See Sensor adjustment details
Open the top cover
by pressing the
cover open buttons
on both sides.
Insert the label roll core into
the label roll
.
Assemble the label
stop plates on both
sides of the roll
.
Feed the label
through the two
Label Guides to the
Tear-off Bar.
Align the label guides
to the edge of label
Loosen and lift the upper print mechanism by pressing the locking
tenons
Place the roll of labels
into the printer
Close the upper print mechanism from the top to finish
label installation.
1.
2.
3.
4.
5.
Ensure that the Printhead is closed firmly
and an audible click is heard when locking
the mechanism down
