16
16
PREPARING TO SKETCH
It is easy to create sketches with Inkling:
•
Start by
attaching the receiver to paper
•
Turn on the receiver. The power LED blinks briefly, then glows green when the receiver is ready.
•
Begin
with the pen.
•
Whenever you feel like
to the sketch, press the new layer button (located on the receiver).
Continue to sketch, adding new layers as you desire.
•
To create a new sketch, remove the finished page from the receiver and add a new page. A new sketch
file is created each time you open and close the receiver clip. See
•
When you are done sketching, turn off the receiver. Then connect the receiver to your computer in
preparation for
viewing and uploading a sketch
.
For best results, be sure to
Tips:
•
Inkling can be used on most relatively smooth, flat surfaces. Use a gentle grip when working with the
pen.
•
As you draw, maintain a direct line of sight between the pen tip cone and receiver. Digital recording will
not occur if your fingertips, hand, or other object blocks the line of sight.
•
Inkling can be used in most environments. Although uncommon, an exceptionally noisy environment
may interfere with the ability of Inkling to accurately record your sketches.
•
If you are in a group setting where other people are using an Inkling, you can still sit beside each other
and not interfere with one another’s work.
Note regarding RSI: Wacom makes no representation, promise or guarantee that Wacom products will cure or
prevent, in whole or in part, mouse-induced repetitive stress symptoms, injuries or conditions.
Individual results may vary. Always obtain competent medical advice to determine the most appropriate
treatment for your specific situation.
