Page 58
CARING FOR YOUR TABLET AND TOOLS
Keep your Graphire3 tools and tablet surface clean. Dust and dirt particles can stick to your tools and cause wear
to the tablet surface. Regular cleaning with a soft, damp cloth will help prolong the life of your tablet surface and
tools; you can also dampen the cloth using a very mild soap diluted with water. Do
not use volatile liquids, such as
paint thinner or benzene, as they may damage the plastic case.
Keep your tablet and tools in a clean, dry place and avoid extremes in temperature. Room temperature is best.
Also, your Graphire3 tools and tablet are not made to come apart. Twisting the pen case can break the pen.
Taking apart the product will void your warranty.
REPLACING THE PEN TIP
The pen tip (nib) will wear with normal use. When the nib gets too short or develops a flat point, you can replace it
with another nib. Simply clasp the old nib with a tweezer, needle-nosed plier, or similar instrument and pull it
straight out of the pen. Then slide the end of the new nib straight into the barrel of the pen – firmly push the nib until
it stops.
To order replacement parts, see
Ordering Parts and Accessories
Important: When the Graphire3
pen is not in use, place it in the
pen storage compartment, the
pen stand included with some
product configurations or lay it
flat on your desk. To maintain
the sensitivity of your pen tip, do
not store the pen in a container
where it will rest on the tip.
