Wacom DTF-720 - OTHER, Installation Manual & User Manual

Page: 16 / 180

Installation
Page 12
LCD MONITOR CABLING DIAGRAM
DTF-720, rear view
– B –
DC IN
(12V)
– A –
VGA cable
Video card
Rear panel of your computer
RGB-I
N
Do not attach the
USB data cable until
instructed to do so.
Power adapter – C – To AC outlet
C
AUTION Use only the power adapter that came with the DTF-720; use of an improper power adapter
may damage the unit.
Do not connect or disconnect the video or power cables while the DTF-720 or your
computer are turned on –
this can damage the display or computer video card.
Make sure that the display refresh rate does not exceed 75 Hz.
RGB-O
UT
VGA port
The RGB-O
UT
port is used to connect
a second VGA device such as a
projector or monitor that mirrors the
pen display. Be sure to fully install the
DTF-720 hardware and software
before connecting a projection device
to the unit. Do not connect or
disconnect any cable while the
DTF-720 or your computer are turned
on.
DTF720_Manual.fm Page 12 Monday, December 22, 2008 10:13 AM