BA 34603_04 US – Edition 2.1 * 34603_04b110.fm
1-5
Introduction
1.5
Fields of application and using the wheel loader with an attachment
The attachments installed determine the intended use of this machine.
Note that not all attachments listed in the table comply with local traffic regulations.
The attachments complying with local traffic regulations and the applicable provisions are
listed in the
machine documentation
!
The legislation of your country may require specific permits, certifications, registrations etc.
for the use of attachments that are not certified or not listed in the machine documentation!
Get informed on and follow the legal regulations of your country.
Important
To minimize the risk of equipment damage and unsafe operating characteris-
tics, the attachments listed below are the only attachments approved for use
with this wheel loader.
Attachments with certified material densities
Possible equipment and authorized material densities.
Description of
attachment
Wheel
loader
Part no.
(model)
Dimensions
Use
Standard bucket –
normal material
WL 750
1000102344
1000102345
1000160648
1
1750 mm (68.89”) with teeth
1750 mm (68.89”) without teeth
1750 mm (68.89”) without teeth
Loosening, picking up, transporting and
loading loose or solid material
(material density
≤
p = 1.8 t/m³)
(material density
≤
p = 112 lbs./cu. ft.)
WL 850
1000096388
1000096389
1000137538
1850 mm (72.83”) with teeth
1850 mm (72.83”) without teeth
1850 mm (72.83”) without teeth
Standard bucket – light-
weight material
2
WL 750
1000096389 1850 mm (72.83”) without teeth Picking up, transporting and loading very
lightweight material
(material density
≤
p = 1.3 t/m³)
(material density
≤
p= 81 lbs./cu. ft.)
WL 850
1000096393 2050 mm (80.70”) without teeth
Standard bucket – super-
lightweight material
2
WL 750
1000096394
2150 mm (84.64”) without teeth
Picking up, transporting and loading light-
weight material
(material density
≤
p = 0.9 t/m³)
(material density
≤
p = 56 lbs./cu. ft.)
WL 850
1000096397
Multipurpose bucket
3
WL 750
1000113244
1000113492
1000168415
1750 mm (68.89”) with teeth
1750 mm (68.89”) without teeth
1750 mm (68.89”) without teeth
Grading, removing and scraping vegetation,
for example; picking up and evenly spread-
ing material; grabbing bulky material; loading
trucks (material density
≤
p = 1.8 t/m³)
(material density
≤
p = 112 lbs./cu. ft.)
WL 850
1000050770
1000096400
1850 mm (72.83”) with teeth
1850 mm (72.83”) without teeth
Side swing bucket
2, 3
WL 750
1000175757 1744 mm (68.66”) without teeth As standard bucket, however with benefits
for filling and backfilling material
(material density
≤
p = 1.8 t/m³)
(material density
≤
p = 112 lbs./cu. ft.)
WL 850
1000176121 1844 mm (72.60”) without teeth
