1-12
BA 34603_04 US – Edition 2.1 * 34603_04b110.fm
Introduction
1.10 Signs and symbols
Labels on the outside of the machine
Label: cab eye hooks
The eye hooks on the cab are for removing the cab only and may
not
be used for crane
handling the machine
– see chapter 3
“Crane handling the machine
” on page 3-50 for fur-
ther details.
Location
Cab roof (4x)
Description
Tie-down points for tying down the machine.
Tie-down points are for tying down the machine during loading and transport
– see chapter 3
“Loading and tying down the machine
” on page 3-52 for further details.
Location
On the left and right of the machine frame above the front axle attachment, and at the rear
underneath the engine
Description
Noise levels produced by the machine.
L
WA
= sound power level
Other information
– see chapter 6
“Noise levels
” on page 6-9
Location
Rear window
Description
Safety alert symbol
This label alerts persons to possible safety hazards in the area where the symbol is
located.
Location
At rear of machine.
Description
Crushing hazard label. This label alerts persons standing or working near the machine to
an existing safety hazard within the area around the machine. Keep clear of machine!
Location
On the loader unit on the left and right, and at the rear on the engine cover.
Description
The CE mark means that the machine meets the requirements of the Machine Directive
and that the conformity procedure has been performed. The machine meets all the health
and safety requirements of the Machine Directive.
Location
On the rear window.
Fig. 9:
Eye hook label
Fig. 10: Label for points used for tying down the machine
XX
Fig. 11: Noise level label
Fig. 12: Safety alert symbol
Fig. 13: Keep distance
Fig. 14: CE mark
ce.ai
