BA 34603_04 US – Edition 2.1 * 34603_04b110.fm
1-13
Introduction
Labels inside the cab
Description (example)
... when using pallet forks with fork arms:
The framed numbers indicate the maximum authorized load on the fork arms for industrial
and off-road applications respectively. The maximum load varies according to the distance
from the load center.
Example:
• Off-road operation
➝
S = 1.67 (safety factor)
➥
Load distance = 500 mm (19.68”)
• The maximum load amounts to e.g. 465 kg (1025.15 lb)!
Tire pressure table
List of authorized types of tires with prescribed tire inflation pressures.
Other information
– see chapter 6
“Tires
” on page 6-8
Location
Inside the cab, on left side of front window
Important
The load diagram is valid only for applications with certified pallet forks.
• – see Attachments on page
1-5
• Observe the specific load diagrams of other attachments used, e.g. rotary
crane jib!
Description
Control lever elements (joystick)
•
A
= traveling direction: (F) forward/(R) reverse and (N) neutral position
•
B
= control lever (joystick) unlocked/locked for road travel
•
C
= control lever (3rd control circuit for attachments) unlocked/locked
•
D
=
loader unit operation: raise, lower, curl and dump
•
E
= 3rd control circuit operation. Pick up/set down attachment
•
F
=
loader unit operation: raise, lower with float position, curl and dump
Location
On the lower right on the side window
Fig. 15: Load diagram
Fig. 16: Label: control lever operation (overview)
A
D
B
C
E
F
E
A
B
C
