Appendix V—Standard Racked Assembly
LTN
92
wc_tx001216gb.fm
13.9
Installing the Tower
Materials
needed
Tower assembly
Hardware bag 8 (tower install assembly)
Installing the
tower
Follow the procedure below to install the tower.
1. Align the tower assembly
(Z)
on top of the Light Tower enclosure as shown.
2. Place the tower assembly over the tower lock pin
(Y8)
and secure it with the
hitch pin. This will help to keep the tower in alignment for the next step.
3. Insert the clevis pin
(Z1)
through the holes in the tower support
(Z4)
and the
tower.
4. Place the 1-inch flat washer
(Z3)
over the end of the clevis pin. Fasten the tower
in place with the 3/16-x-2 cotter pin
(Z2)
.
5. Adjust the alignment of the tower lock pin
(Y8)
if necessary. Torque lock nut
(
Y10)
to 48 Nm (35 ft.lbs.).
Reversing the
winch handles
The winch handles
(AA2)
are installed backward to protect them from shipping
damage. Reverse each handle orientation as follows:
1. Remove the nut
(AA1)
and remove the winch handle from the stem.
2. Turn the winch handle so that the handgrip is oriented as shown in the
illustration.
3. Re-install the winch handle and the nut.
wc_gr006531
Z3
Z
Z4
Y8
Y10
AA1
AA1
AA1
AA1
AA2
AA2
AA2
AA2
Z2
Z1