Appendix III—Standard Pallet Assembly
LTN
72
wc_tx001214gb.fm
11 Appendix III—Standard Pallet Assembly
Scope
This set of assembly instructions applies to standard machines shipped on a pallet
as shown below.
If your machine does not look like the one shown in the illustration, refer to
Machine
Identification
in the
Introduction
chapter to identify the appropriate set of assembly
instructions.
Tasks
To complete the assembly of your Light Tower, the following tasks must be
performed in the order listed:
Tools and
materials
The following tools and materials are needed:
Basic hand tools (wrenches, screwdrivers, etc.)
Torque wrench
Hardware bag: 7
wc_gr006467
Task
Description
See topic
Outriggers and jacks assembly
1
Install the outriggers
11.1
2
Install the outrigger jacks
11.1
3
Install the rear jack
11.2
Tongue assembly
4
Install the tongue
11.3
5
Install the tongue jack
11.3
Upper light installation
6
Install the upper light fixtures
11.4