HI 400HD D / HD G
Operation
ghi_tx001462gb.fm
35
4.17
Installing the Remote Thermostat or Receptacle Cap
Requirements
Remote thermostat,
or
Thermostat receptacle cap
Background
The control panel includes a receptacle for an optional remote thermostat
(b).
The
receptacle is protected by an attached cap
(a)
when not in use.
NOTICE:
To avoid damaging or contaminating the receptacle, make sure the
cover is securely locked in place when a remote thermostat is not installed.
To install the remote thermostat, remove the cap, insert the plug into the receptacle
and lock the plug in place.
Operational
notes
When the mode switch is set to the upper (continuous heat) position, the heater
will operate without a remote thermostat.
When the mode switch is set to the lower (remote thermostat) position, the
heater will not operate unless a remote thermostat is plugged into the receptacle
and the signal is read by the control board.
Summary of Contents for HI 400 HD D
Page 67: ......