Wacker Neuson G 25, Operator'S Manual, Page: 89 / 214

wc_tx003229gb_FM10.fm
89
Mobile Generator Working with Basler Controller
Continued from the previous page.
3. Highlight ALARM CONFIGURATION. Then, press the right arrow button.
4. Highlight PRE-ALARMS. Then, press the right arrow button.
5. Highlight the MAINTENANCE INTERVAL. Then, press the right arrow button.
6. Highlight the THRESHOLD. Then, press the check mark button (5) .
7. If you are not logged in, enter the password “OP”. Press the check mark button.
8. Using the up/down arrow buttons, change the value as desired. Press the check
mark button when finished.
9. Exit by pressing the left arrow button (4) three times or until the LCD displays
the SETTINGS menu. Then, scroll to LOGOUT and press the check mark
button. Press the left arrow button so that the READY screen appears.
Result The maintenance interval has now been changed.