Wacker Neuson EH 6, Operator'S Manual, Page: 37 / 60

EH 6, EHB 7 7 Operation
Operator's manual 37
V
e
rsion 001
7.4 Starting up
Connecting the machine to the power supply
The machine may only be connected to AC single phase, connection values see
chapter
Technical Data .
1. If required, connect the machine to a permitted extension cable.
Note: See chapter Technical data for the permitted lengths and cross-section
areas of extension cables.
2. Insert the plug into the plug receptacle.
NOTICE
Electrical voltage.
Incorrect voltage can cause damage on the machine.
f Check if the voltage of the current source corresponds with the information
of the machine, see chapter
Technical Data .
WARNING
Electrical voltage.
Injuries from electrocution.
f Check power cable and extension cable for signs of damage.