Wacker Neuson EH 6, Operator'S Manual, Page: 24 / 60

5 Description EH 6, EHB 7
24 Operator's manual
V
e
rsion 00
1
Changeover switch
The changeover switch has 2 or 3 operating mode positions depending on ma-
chine. The symbol in the viewing window of the changeover switch identifies the
selected operating mode.
While in operating mode "Positioning," it is possible to turn a flat chisel by hand
to achieve the correct working position.
Vibration reduction
The severity of the vibrations are reduced with the vibration reducer.
The vibration reducer makes it possible to handle the machine for a longer period
without becoming fatigued.
ON/OFF switch
A start-up protection is linked with the ON/OFF switch. This start-up protection
has the effect that the percussion rate or speed of the rotary hammer rises slowly
after pressing the ON/OFF switch. The start-up protection prevents or reduces
the chisel from slipping or the drill from jamming.
Depending on model, continuous operation can be set with the ON/OFF switch.
Chiseling
Hammer drilling
(only EHB 7)
Positioning