Wacker Neuson EH 6, Operator'S Manual, Page: 10 / 60

3 Safety information EH 6, EHB 7
10 Operator's manual
V
e
rsion 00
1
3 Safety information
3.1 Principle
State of the art
This machine has been constructed with state-of-the-art technology according to
the recognized rules of safety. Nevertheless, when used improperly, dangers to
the life and limb of the operator or to third persons or damage to the machine or
other materials cannot be excluded.
Proper use
The machine must only be used for the following purposes:
„
To drill holes with a diameter of maximum 90 mm.
„
For breaking, chiseling, digging, puddling, hammering, ramming and deburr-
ing tasks.
„
To process natural and synthetic stone.
„
To process asphalt and any type of masonry and concrete.
Its proper use also includes the observance of all instructions contained in this
operator's manual as well as complying with the required service and mainte-
nance instructions.
Any other use is regarded as improper. Any damage resulting from improper use
will void the warranty and the liability on behalf of the manufacturer. The operator
assumes full responsibility.
Structural modifications
Never attempt to modify the machine without the written permission of the man-
ufacturer. To do so will endanger your safety and the safety of other people! In
addition, this will void the warranty and the liability on behalf of the manufacturer.
Requirements for operation
The ability to operate the machine safely requires:
„
Proper transport, storage and setup.
„
Careful operation.
„
Careful service and maintenance.