BA 1404 en – Edition 2.7 * 1404b330.fm
3-29
Operation
Caution!
Never stop the engine under full load, otherwise it can be damaged due to
overheating. Except in case of an emergency, always ensure that the engine
can cool down before it is stopped.
☞
Let the engine run at idling speed with no load for at least 5 minutes before
you switch it off.
Notice!
Secure the machine against unauthorized operation.
• Raise the control lever base.
• Remove the starting key and carry it with you.
• Lock the cab (option)
3.13 Parking the machine on slopes
☞
Avoid stopping the machine abruptly. Always ensure that there is enough space for
stopping the machine.
• Park the machine on level, stable ground. Never park on slopes. If you cannot avoid
parking the machine on a slope:
☞
Place chocks under the tracks and lower the attachment into the ground to prevent
the machine from moving.
• Severe accidents can be caused by unintentionally actuating the control levers, and
hence moving the attachment or the entire machine.
☞
Raise the control lever base before leaving the seat.
☞
Place the stabilizer blade downhill and lower it to the ground.
Abb. 75: Parking the machine on slopes
Summary of Contents for E09-01
Page 8: ...1 6 BA 1404 en Edition 2 7 Ba1404en2_7IVZ fm Table of contents...
Page 23: ...BA 1404 en Edition 2 7 1404b110 fm 1 13 Introduction Overview of safety labels...
Page 171: ...BA 1404 en Edition 2 7 1404b560 fm 5 43 Maintenance DIN 51 502 DIN 51 825 1000156007 1...
Page 172: ...5 44 BA 1404 en Edition 2 7 1404b560 fm Maintenance...
