3-84
BA 1404 en – Edition 2.7 * * 1404b340.fm
Operation
Working alongside trenches
Danger
!
Improper or careless operation of the machine during work alongside trenches,
slopes, etc., carries an increased
Danger of falling!
☞
Secure trenches before beginning to work. Pay attention to ground condi-
tions, machine weight, etc.
☞
Always use stabilizer blade
B
for stabilization during excavation work.
Caution!
Danger of damaging piston rod
A
of the boom cylinder when working
alongside trenches, slopes, etc. and operating the stabilizer blade and the
boom incorrectly.
☞
Always use stabilizer blade
B
for stabilization during excavation work.
☞
Ensure that stabilizer blade
B
never touches piston rod
A
.
☞
If you perform deep excavations with stabilizer blade
B
at the front, ensure
that piston rod
A
does not touch or rest on stabilizer blade
B
.
Further recommendations for digging
When planning and performing digging work, we recommend that you observe the follow-
ing points:
• Exits from pits must be outside the digging line and as level as possible.
• Dig by removing adjacent strips if possible.
• Ensure that you can drive forward when driving out of the digging area with a fully
loaded bucket.
• Whenever possible, perform reverse machine travel when transporting a full bucket
down a steep slope.
Abb. 179: Deep excavation
B
A
Summary of Contents for E09-01
Page 8: ...1 6 BA 1404 en Edition 2 7 Ba1404en2_7IVZ fm Table of contents...
Page 23: ...BA 1404 en Edition 2 7 1404b110 fm 1 13 Introduction Overview of safety labels...
Page 171: ...BA 1404 en Edition 2 7 1404b560 fm 5 43 Maintenance DIN 51 502 DIN 51 825 1000156007 1...
Page 172: ...5 44 BA 1404 en Edition 2 7 1404b560 fm Maintenance...
