Wacker Neuson E09-01, Operator'S Manual

Page: 114 / 188

3-72
BA 1404 en – Edition 2.7 * * 1404b340.fm
Operation
Hydraulic quickhitch – Easy Lock (option)
•
Attend specific training before putting into operation. Training must be given by
authorized technical personnel and must be understood by the operator.
•
For safety reasons, the quickhitch must be operated with two control elements. This
avoids opening the quickhitch unintentionally during work operation.
•
Both hitch claws must be clean before hitching.
•
For more information, see Easy Lock/Powertilt with Easy Lock Operator’s Manual.
•
Store the Operator’s Manual of the hydraulic quickhitch together with the Operator’s
Manual of the machine.
Danger
!
Crushing hazard when picking up attachments!
If an attachment is not locked correctly, it can come off and cause serious
injury or death.
☞
Do not allow anyone to stay in the danger zone.
☞
Do not use damaged attachments.
☞
Check pin F must be fully retracted. Otherwise repeat the lock cycle until
check pin F is retracted.
☞
Ensure safe locking with a rapid succession of stick and bucket movements
as close as possible to the ground.
☞
Operate the machine only with a safely locked attachment.
Danger
!
Crushing hazard when attachments are removed!
If an attachment is not locked correctly, it can tip over and cause serious injury
or death.
☞
Do not allow anyone to stay in the danger zone.
☞
Lower the attachment to level and firm ground ensuring stability.
Danger
!
Injury hazard due to incorrect operation of the hydraulic quickhitch!
For system-specific reasons, the quickhitch can also be operated with other
hydraulic functions. This can cause serious injury or death.
☞
Operate the hydraulic quickhitch only with the function Raise stabilizer
blade .