manualshive.com logo in svg

Wacker Neuson BS 70-2, Operator'S Manual, Page: 2 / 50

Share
Download
Wacker Neuson BS 70-2 Operator'S Manual Download Page 2

Copyright 
notice

© Copyright 2011 by Wacker Neuson Production Americas LLC

All rights, including copying and distribution rights, are reserved.

This publication may be photocopied by the original purchaser of the machine. Any 
other type of reproduction is prohibited without express written permission from 
Wacker Neuson Production Americas LLC.

Any type of reproduction or distribution not authorized by Wacker Neuson Production 
Americas LLC represents an infringement of valid copyrights. Violators will be 
prosecuted. 

Trademarks

All trademarks referenced in this manual are the property of their respective owners.

Manufacturer

Wacker Neuson Production Americas LLC

N92W15000 Anthony Avenue

Menomonee Falls, WI 53051 U.S.A.

Tel: (262) 255-0500 · Fax: (262) 255-0550 · Tel: (800) 770-0957

www.wackerneuson.com

Original 
instructions

This Operator’s Manual presents the original instructions. The original language of this 
Operator’s Manual is American English.

Summary of Contents for BS 70-2



















































Reviews:

No comments