Wacker Neuson BS 70-2, Operator'S Manual, Page: 12 / 50

Safety Information BS 60-2 / BS 70-2
12
wc_si000474gb.fm
1.3.10 Make sure that all other persons are at a safe distance from the
machine. Stop the machine if people step into the working area of the
machine.
1.3.11 Be sure operator is familiar with proper safety precautions and
operation techniques before using machine.
1.3.12 Always wear protective clothing appropriate to the job site when
operating the machine.
1.3.13 Always keep hands, feet, and loose clothing away from moving parts
of the machine.
1.3.14 Always use common sense and caution when operating the machine.
1.3.15 Always be sure the rammer will not tip over, roll, slide, or fall when not
being operated.
1.3.16 Always turn the engine OFF when the rammer is not being operated.
1.3.17 Always guide the rammer in such a way that the operator is not
squeezed between the rammer and solid objects. Special care is
required when working on uneven ground or when compacting coarse
material. Make sure to stand firmly when operating the machine under
such conditions.
1.3.18 When working near the edges of breaks, pits, slopes, trenches and
platforms, always operate the rammer in such a way that there is no
danger of it tipping over or falling in.
1.3.19 Store the machine properly when it is not being used. The machine
should be stored in a clean, dry location out of the reach of children.
1.3.20 Close fuel valve on engines equipped with one when machine is not
being operated.
1.3.21 Always operate machine with all safety devices and guards in place
and in working order. Do not modify or defeat safety devices. Do not
operate machine if any safety devices or guards are missing or
inoperative.
1.3.22 Do not transport the machine while it is running.
1.3.23 Do not tip the machine for cleaning or for any other reason.