Wachs WS-164, User Manual, Page: 42 / 96

Diamond Wire Saw User’s Manual
38 Part No. 10-010-MAN, Rev. 1-0310 E.H. Wachs
Figure 4-2. Grease the feed components shown at the
top of the feed system.
3.
Pump AquaLube into the grease fitting on the feed
screw mount at the bottom of the screw.
Figure 4-3. Grease the fitting at the bottom of the feed
screw.
4.
Pump AquaLube into the grease fittings on the cylin-
der rod ends until grease is visible.
Feed block Feed motor Feed gears