Wachs WS-164, User Manual, Page: 15 / 96

Chapter 1, About the Diamond Wire Saw: Equipment Description
E.H. Wachs Part No. 10-010-MAN, Rev. 1-0310 11
Lifting for Vertical Cut
Attach the machine to the lifting device using chains on the
top lift hooks. Tip the machine up to a vertical position, then
pick it up. Make sure the chains are the appropriate length to
hold the machine reasonably straight.
Figure 1-11. To position the machine vertically on the
pipe, attach to the two top lift hooks.
Lifting for Horizontal Cut
With the machine positioned horizontal on the floor or deck,
attach a lift to the two hooks on the lift bar and the front
hook on top of the frame.
Figure 1-12. To position the machine horizontally on
the pipe, attach to the two lift bar hooks and the front
hook on the top.
IMPORTANT: Do not attach to this hook
when lifting the machine vertically!