Wachs WS-164, User Manual, Page: 33 / 96

Chapter 3, Operating Instructions: Performing the Cut
E.H. Wachs Part No. 10-010-MAN, Rev. 1-0310 29
P
ERFORMING THE
C
UT
The cutting wire spins at very
high speed. If the wire
breaks, segments of the wire
can fragment and be thrown
from the machine at danger-
ous speeds. Make sure all
personnel are at a safe dis-
tance before starting the cut-
ting drive.
Serious injury or
death could result from
contact with the wire or as
a result of the wire break-
ing.
1.
Push the feed flow lever down to open the feed circuit.
Figure 3-12. Push the feed flow lever down to supply
power to the feed drive.
2.
Set the feed speed knob to 2.5 gpm.
Figure 3-13. Push the feed speed knob down to
2.5 gpm.
WARNING