Technical Manual
WDGA with EtherNet/IP
6 - Commissioning
© Wachendorff Automation GmbH & Co. KG
65
Now switch back to the "Controller Tags". Under "WDGA_EP:I1.Data[8]" you can
now see whether you are inside or outside the work area.
Figure 6.42: Position state register inside work are
Figure 6.43: Position state register outside work area
6.5.2 Preset Attribut 140h
If you have already executed a preset, as explained in Chapter 6.4.2, you can use
"preset execute" to set the position value to the previously defined preset value again.
Proceed as explained in the previous chapters.