WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
3
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
INSTALLATION INSTRUCTION
Grand Accent
5212
7.
Place the Power Stake Cap with attached light fixture over
the PVC Light Stake.Carefully push the incoming supply line cable
down into the PVC Light Stake. Tighten the hex-head screw
clockwise on the Landscape Power Stake Cap.
8.
Lower the completely wired and assembled Landscape
Power Stake into the excavated hole.
Make sure that the excavated hole is approximately 13”
deep to allow the hex-head set screw on the Landscape
Power Stake Cap to remain above the ground.
9.
er Stake.
10. Repeat steps for other fixtures in the same electrical circuit
11. Turn the main pow
light up.
Step 4: Aiming the Fixture
12. Tilting: Loosen the joint scr
to the desired direction before retightening the screw.
13. Rotating: Loosen the moun
the desired position before retightening the knob.
Mounting Knob
Tilting
Rotating
Joint Screw
