WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
2
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
Rated Wire Nut
Qty: 3pcs
Hex Key
Qty: 1pcs
7MPE155003
1/16“
Adjustable Shroud
Qty: 1pc
MOUNTING ACCESSORIES
1.
.
2.
Excavate a trench for the UF supply line cable or
conduit/conductors and the Landscape Power Stake.
The Landscape Power Stake requires approximately
a one (1) square foot hole to facilitate installation.
The excavated should be approximately 15” deep.
This will allow the hex-head set screw on the Power
Stake to remain above ground when the installation is completed.
3.
Turn the hex-head set screw counterclockwise to
remove the Power Stake Cap from the top of the PVC Light Stake
4.
Feed the light fixtures black, white, and ground wires
through the top of the Power Stake Cap. Then, thread
the light fixture until it’s firmly attached to the Power Stake Cap.
5.
Fed the incoming supply line cable through the slanted
bottom of the PVC Light Stake. Note: If you are wiring
multiple light fixtures in series, also bring the second
supply line cable into the PVC Light Stake.
6.
Using appropriate UL Listed wire connectors, splice the white
incoming supply line’s black wire(s). Then splice the ground
ground wire(s).
INSTALLATION INSTRUCTION
Grand Accent
5212
Light Fixture
Power Stake Cap
PVC Stake
Incoming UF
supply line
cable of
conduit
Cap Locking Screws
1/2" NPT Threaded Hole
