WAC Lighting 5021-CCBBR, Installation Instruction

Page: 15 / 22

7 ilumenight setup instruction
4. COMMISSIONING SCREEN
4.1.3 Saturation
Saturation adds gradients of color to a white point.
Saturation can be added in increments of 1%, from 0 - 100%
(fully saturated).
Tapping on either side of the slider moves the lamp in 10%
increments.
Pressing and holding along the slider will bring up a keypad
for direct entry of the saturation percentage.
Enter the percentage and then touch “Done”.
4.1.4 Hue
Hue enables different colors to be added to the light in values
from 1 to 60.
Tapping on either side of the slider moves the lamp in
6° increments.
Pressing and holding along the slider will bring up a keypad
for direct entry of the hue value.
Enter the value and then touch “Done”.
4.1.5 ‘Apply to Group’ Button
If more than one lamp is assigned to a group, the Apply to Group button is displayed. Tapping on
this button will apply the current commissioning choices (made to a single lamp) to all of the lamps
in the same group.
If this switch is toggled to the “on” position, any changes made to the lamp will always be applied to
the entire group in real time.