background image

10     

 ilumenight setup instruction 

5. OPTIONS MENU (UPPER RIGHT OF COMMISSIONING SCREEN)

5.2 Discovery Distance

This changes the discovery distance. When commissioning multiple lamps, reducing the discovery  

distance enables connection to the closest lamp.

5.3 Logout

Logs out of the current account.

5.4 Change Password (only active when logged in)

Changing the password will change the current account password. This will secure the lamps that have 

been commissioned using the original password, and the 

 icon for those lamps on the Main Screen  

will turn magenta.

5.5 Reset Lights Password (only active when logged in)

This command will clear the password that was set for 

each lamp currently displaying in the app. It will ask 

the user for a Master Password (different from the login 

password) to perform this operation. This Master Password 

can be obtained by contacting your WAC LIGHTING sales 

representative.

NOTE:

 Internet access is required to perform this action.

5.6 Reset Application

Used mainly for debugging purposes, this operation will delete the account and password,  

remove the control on the lamps and perform a refresh.

NOTE:

 Internet access is required to perform this action.

Summary of Contents for 5021-CCBBR























Reviews: