Page 7
Button combinations: Pairing, functions reprogramming and factory reset
Pairing buttons
:
Press and hold
HEAD DOWN
and
FOOT UP
buttons together on the remote and within 10 seconds of powering up the system (after plugging
in power supply cable to surge protector or wall outlet), a beep should be heard when pairing is completed (see “Remote Pairing” section for more details).
Reprogram Zero-G Function
:
Press and hold
ZG
and
FLAT
buttons together for 5 seconds until hearing the beep to save
Zero-G
as current base position.
Restore to Factory Settings
:
Press and hold
FOOT UP
and
FOOT DOWN
buttons together for 5 seconds until hearing the beep to repgroam to factory
settings. After hearing the beep, the functions Zero Gravity, Snore, and TV will be restored to factory configurations.
Power Down Emergency Function:
Press and hold
HEAD DOWN
or
FOOT DOWN
button to lower the base section in case of a power outage. Backup 9V
batteries inside power supply unit should have enough charge for this function to work (see “Base Assembly” section, Step 5).
Foot Up
Press and hold
to raise the foot
Foot Down
Press and hold
to lower the foot
Head Up
Press and hold
to raise the head
Head Down
Press and hold
to lower the head
Zero Gravity
Press and release to
achieve
Zero-G position
Flat
Press and release
to lower the base
to flat position
Remote Control Operations
Remote Flash Light
Press and hold to turn ON the flashlight
located on the remote control, release
the button to turn flashlight OFF
