Page 4
Step 8 - Two Base Synchronization (Split Sizes Only) - Optional
Use if you are setting up two Twin XL bases to use with one King size mattress, or when setting up two
parts of Split California King base model with one Cal-King mattress.
Using one King or Cal-King mattress with two Twin XL or Cal-King
bases requires synchronization of both control boxes, this function
allows remote controls to operate both units together. This is achieved
by connecting the “Sync Cable” to each of the control boxes.
Locate
the sync cable in the accessories box and control boxes attached
underneath the bases (see “Parts List” section). Plug one side of
the sync cable into the “Sync Cable” inlet of first control box,
repeat procedure with the other side of the sync cable on the second
control box.
SYNC
CABLE
NOTE:
You might receive two sync cables (one with each base),
you only need to use and connect
ONE
sync cable.
Step 9
For safety reasons, the following step should be performed by two people. Lift and rotate the bed to its final position,
holding the metal frame.
WARNING: DO NOT
LEAN THE WEIGHT OF
THE BASE AGAINST
THE SIDE OF THE LEGS,
DOING SO MAY RESULT
IN PERSONAL INJURY
AND/OR PRODUCT
DAMAGE.
