background image

NOTE: 

THESE BACKUP BATTERIES WILL ALLOW THE BED TO BE LOWERED IF A POWER OUTAGE 

OCCURS. IT IS RECOMMENDED NOT TO DO ANYTHING EXCEPT TO LOWER THE BED AS THE BATTERY 

BACKUP WILL NOT ELEVATE THE BED SECTIONS. 

HEAD AND FEET SECTIONS CAN BE LOWERED BY 

PRESSING “HEAD DOWN” OR “FOOT DOWN” ON REMOTE CONTROL.

It is recommended to replace the two 9 volt batteries every 12 months or after every emergency lowering use. It is important 

to always have extra 9 volt batteries in case extra energy is needed during a power outage.

Base  Assembly  

Page 3

Step 5 

Remove the twist ties and

release the DC cord.

Step 7

Insert the AC cord into the Pow

-

er Supply and lock it using the 

clip. NOTE: DO NOT PLUG 

BASE INTO THE POWER 

OUTLET YET. 

Step 6

Plug the two 9 volt batteries 

(included) in the compartment of 

the Power Supply and insert the 

cover to close.*

Step 1 

For safety reasons, It is highly recommended to use two people for lifting and the installation of this product. Before assembly, 

place the unit in the final installation location to make the assembly process easier. The unit should always be in a flat surface 

when opening and placed top side down on the floor according to the box instructions. Remove the top section of the box.

Step 4 

Screw in the provided legs (6) in each corner and center of the base rotating clockwise 

until tight. 

DO NOT OVER TIGHTEN THE LEGS.

Step 2 

Carefully lift top 

section of the base 

from the opposite 

side of the hinges 

to unfold.

Step 3 

Remove any 

accesory boxes/

bags and untie the 

mattress retainer, 

which is held with 

orange plastic ties.

Summary of Contents for COMFORT-n-MOTION U10













Reviews: