Connecting source equipment to analog inputs on the soundbar:
•
RCA inputs, using the supplied RCA cables, connect the source equipment to the soundbar.
Connect red cable end to red jack, white cable end to white jack.
•
Aux input, use a 3.5mm male plug to connect to the jack on the back of the soundbar.
•
Using analog inputs is the easiest manner to connect source equipment to the soundbar.
In most instances (check the manufacturer’s manual) you can connect all source equipment to a
television using HDMI, digital coax, digital optical or RCA connections and the 3.5mm or RCA
output of the TV will be an analog 2 channel signal. No menu changes on source equipment will
be necessary. If you are having trouble using the optical or coax digital inputs on the soundbar
use one of the analog inputs. They are very low noise and very high quality, in most instances it
is difficult to notice a difference in sound quality.
Making connections
Caution: All connections and switching should be done with the AC power switched OFF.
The final connection should be the power cords.
INPUTS
The inputs are located on the back of the soundbar. They include 18VDC power, analog RCA, Digital
Optical, Digital Coaxial and 3.5mm jack
Connect red and black
stereo RCA plug from TV
Coax digital
supporting 2
channel PCM
Bitstream
Optical digital
cable
supporting 2
channel PCM
Bitstream
3.5mm stereo plug
from mobile device,
TV, etc.
5
Summary of Contents for 0E-SB80
Page 11: ......