45
308.708.8185 | [email protected] | Rev. 11/20
RETURN TO INDEX
Troubleshooting
Problem
Possible Cause
Solution
Blades not turning.
Blade not making contact with the
ground.
Make sure the machine is making contact
with the ground.
Residue build-up is preventing the blade
from turning.
Remove residue build-up from the blades.
The bearing has gone out or is seized.
Replace hub.
Beds are uneven.
Machine is not running level.
Adjust machine to be level side to side.
Adjust the level from front to back to change
shape of beds.
Check gauge tire pressure to make sure all
tires are equal.
Wings are riding out of ground.
Make sure that wing down force is on and
working. (See page 39)
Wings are floating up
Toolbar is not level.
Level toolbar.
Wing down force not in use.
Make sure that wing down force is on and
working (See page 39)
Wing down force flow set too low
Ensure engaged properly, adjust flow setting.
(See page 39)
TROUBLESHOOTING
Summary of Contents for Delta Plow
