36
When Adding Fuel
• Turn engine off and let engine cool at least 2 minutes before removing the fuel cap.
• Fill fuel tank outdoors or in well ventilated area.
• Do not overfill fuel tank. Fill tank to approximately 38 mm below top of neck to allow for
fuel expansion.
• Keep petrol away from sparks, open flames, pilot lights, heat, and other ignition
sources.
• Check fuel lines, tank, cap, and fittings frequently for cracks or leaks. Replace if
necessary.
• If fuel spill, wait until it evaporates before starting engine.
1. Clean the fuel cap area of dirt and debris. Remove the fuel cap.
2. Fill the fuel tank with petrol. To allow for expansion of the petrol, do not fill above the
bottom of the fuel tank neck.
3. Reinstall the fuel cap.
Maintenance
Use only original equipment replacement parts. Other parts may not perform as
well, may damage the unit, and may result in injury.
In addition, use of other parts
may void your warranty. We recommend that you see any Authorized Dealer for all
maintenance and service of the engine and engine parts.
CAUTION
All the components used to build this engine
must remain in place for proper operation.
!
WARNING
Unintentional sparking can result in fire or
electric shock.
Unintentional start-up can result in
entanglement, traumatic amputation, or
laceration.
Fire hazard
