VWR VWRC0386A, Instruction Manual

Page: 40 / 94

6-2 Chest Freezer VWR International
Section 6
Maintenance
1. Remove all product and place it in another freezer.
2. Turn the unit off and disconnect it from the power source.
3. Turn off the battery switch (O). See Figures 6-1 and 6-2.
4. Open the lid and remove sub-lids. Place towels on the chamber floor.
5. Allow the frost to melt and become loose. Remove with a soft cloth.
6. After defrosting is complete, clean the interior with a non-chloride
detergent. Rinse thoroughly with clean water and dry with a soft cloth.
7. Plug unit in and turn power switch on.
8. Turn the battery power switch to Standby mode ( ).
9. Allow the freezer to operate empty overnight before reloading product.
The lid gasket should be cleaned a minimum of once per month. Using a
soft cloth, remove any frost build-up from the gasket, sub-lids and lids.
The clean gasket alarm occurs every three months as a reminder to remove
frost build-up from the gasket and doors. Press the Mute key to silence the
audible alarm. The lid gasket may need to be cleaned more frequently if
dirt or excessive frost build-up prevents the door from closing properly.
The following instructions describe the battery replacement procedure for
specific models.
Note For a consistent and dependable charge, replace the battery every 2
years. Replacement batteries must be rechargeable and are available from
VWR. Refer to the parts list for stock number and description of the
replacement batteries (P/N 400159). Dispose of the used batteries in a safe
manner and in accordance with good environmental practices.
s
Defrost Chamber
Clean Lid Gasket
Replace Battery(s)