Instruction Manual INCU-Line Peltier Cooled
Page
28
/
33
9.2 Interior cleaning
1.
The chamber should be emptied of any samples before cleaning.
2.
Open the door of the device and wait for the frost to melt, take out the shelves and start cleaning the
device.
3.
Only water or mild detergent should be used.
4.
Having finished cleaning, you should allow the device to dry completely.
5.
During cleaning pay attention not to damage the temperature sensor in the chamber.
10 ADVICE ON HOW TO SAFELY STORE THE DEVICE
1.
Remove all objects from the chamber.
2.
Disconnect the device from the mains.
3.
Clean and dry the chamber.
4.
Leave the door open to allow adequate ventilation.
5.
Store in temperatures
between 0°C and 50°C and relative humidity maximum 70%.
11 TROUBLESHOOTING
Before you contact VWR Service Department:
1.
Make sure that the operation complies with the instruction manual of the device.
2.
Restart the device to make sure that the unit is not functioning properly. If it still does not work,
disconnect the unit again from the mains and repeat the operation after one hour.
Technical service
Visit the VWR’s website at www.vwr.com for:
• Complete technical service contact information
• Access to VWR’s Online Catalogue, and information about accessories and related products
• Additional product information and special offers
Contact us for information or technical assistance contact your local VWR representative or visit
www.vwr.com
