Instruction Manual INCU-Line Peltier Cooled
Page
27
/
33
9 CLEANING AND MAINTENANCE OF THE DEVICE
Maintenance (cleaning of the housing and the chamber) should be carried out at least once a week
(depending on the environmental conditions in the workplace).
To clean products made of stainless steel (INOX) we recommend using cleaning solution dedicated particu-
larly to stainless steel material. It preserves the steel surface from permanent stains and retains aesthetic
appearance of the product.
INOX products are made of stainless steel, when used in standard laboratory conditions they do not rust.
However it is possible that stains (which may look like rust) form on the steel surface (e.g. due to the kind of
samples that are incubated in the chamber). In such case we recommend using cleaning solution (to clean
the stains) which is dedicated to this particular application, e.g. Pelox.
9.1 Exterior cleaning
1.
The housing and door should be cleaned with caution, using a soft cloth dampened with water.
2.
Only mild cleaning products should be used to clean the device.
3.
Electrical parts should not be in contact with water or detergent.
4.
Clean the touch screen using a soft cloth for touch screens, or it is possible to use foam for cleaning
touch screens.
5.
USB port
can be cleaned with a vacuum cleaner to prevent accumulation of dirt inside the socket.
Before cleaning the device, it needs to be disconnected from the electrical supply!
When cleaning stainless steel products with dedicated cleaning solution, one should pay
attention to the suggestions and recommendations given in the user manual (or in the
safety data sheet) of the cleaning solution.
