1
Instruction manual |
11
7.1.4 Installing eyepieces
Insert both eyepieces into the tubes of the optical head. (Fig. 9)
7.1.5 Installing the condenser
1
Slide the condenser into the condenser holder, inserting the
pin on the rear side of the condenser with the alignment
groove in the condenser holder. (Fig. 10)
2
Lock the condenser with the locking knob 1 on the right side
of the condenser holder. (Fig. 11)
3
Insert the Phase contrast slider (or the DF slider) into the
condenser, printed face up. (Fig. 12)
4
Pull the slider into the “SL” position, to the click stop.
FIGURE 10
FIGURE 11
FIGURE 12
FIGURE 9