Gel Imagers
8
Using the System
Powering Up the System
Power up the system by pushing once on the
MAIN
POWER
button located on the right side
of the unit. All internal components will now
have power.
Turn on the transilluminator and darkroom
power switches.
To power down the system, push the main
power button.
Adjusting the Screen Angle
To adjust the angle of the screen, loosen
the knobs on each side of the monitor.
Twist each knob counter-clockwise (Note
that the knobs will be turning opposite
directions.)
Tilt the screen to the desired angle.
Turn each knob clockwise to tighten.
