VWR 620-2675, Operating Manual

Page: 12 / 24

6 | Operation TD310
12 / 24 B-H86.0.04.DB201-1.0
6 Operation
6.1 Commissioning
6.1.1 Explanation
_
Description
The product is switched on with the
On/Off button
. It may be necessary to configure
the product after switching on. See Configuration [ } p. 12] .
_
Prerequisite – Sufficiently full batteries are inserted in the product.
_
Instruction
– Press
On/Off button
.
_
Outcome of an action
POFF
Automatic shut-
off Automatic shut-off activated. The product is
switched off if no buttons have been pressed after
the adjusted time
OFFS
Zero point correc-
tion If a zero point correction of the temperature sensor
was made
S(AL Gradient correc-
tion If a gradient correction of the temperature sensor
was made
– The product is now ready for measurement.
6.2 Configuration
6.2.1 Explanation
The following steps describe how to adapt the product for your purposes.
_
NOTE
There are various configuration parameters available depending on the product ver-
sion and configuration. They can differ depending on the product version and configur-
ation.
6.2.2 Opening the configuration menu
_
Description
In order to configure the product, you must first open the
Configuration
menu. The
menu is opened as shown in the illustration.
_
Prerequisite
_
Instruction
1. Press the
On/Off button
to switch on the product. The display shows a segment
test. Press and hold the Max/Min button for 2 seconds during the segment test.
The display shows the first parameter.
2. When you have selected the desired parameter, change the parameter to the de-
sired value with the
Max/Min button
and the
Hold button
.
3. Press the
On/Off button
to switch to the next parameter.
_
Representation
Switch on the
product Call up menu Change value Next parameter Save a value
2s during the
segment test Up / Down After the last
parameter
_