Instruction Manual INCU-Line Cooled
Page
17
/
32
In the main window press ESC
twice.
Enter PROGRAMMING using ENTER
.
Choose the program you want to edit using
and
.
Press ENTER
, then use
and
to set the number of
segments. Confirm with ENTER
.
Then you can choose the set temperature for segment 1. Use
and
to set a new value, then confirm with ENTER
. Set
the decimal value in the same way.
Now you can set the segment time in dd:hh:mm format.
If the program has more than one segment, you can set its pa-
rameters here.
Here you can set start delay in hh:mm format if required.
Here you can set if the program should run in cycles:
- it can be OFF, the program will stop after finishing
- infinite cycles
– the program will continue to run till it is stopped
by the user
