Attach the camera to the Bracket and slightly pull camera down
to snap the camera in place.
Align Power Cable and extend the Conduit to preferred length.
Secure conduit onto the wall.
Adjust the camera to your desired position and angle.
Tighten the security
screws on both sides
by using the supplied
Allen Wrench.
Adjust the lens vertically with
fingers to your desired position.
Do not over-tighten the security screws.
Manage the cable with optional Conduit. Remove the adhesives from the Conduit,
then slide the bottom of the Conduit into the Bracket.
09
10
Summary of Contents for VuCam
Page 1: ...USER S MANUAL...
