4.
5.
My VUcam is “Offline”.
1)
2)
How can I reset my camera?
VUcam can be reset through app, you can remove camera and re-add the camera in app
again. You can also reset the camera manually by pressing the reset button at back for 7
seconds until you see the flash light changes to red.
Reboot camera: Turn off your VUcam (using the light switch it’s connected to) and wait
at least 10 seconds. Then, turn on the light switch back on.
Run through the set-up process: Re-add the VUcam again.
This may be caused by weak Wi-Fi signal. Improve performance by moving your router
closer to your VUcam, or adding a Wi-Fi extender in between.
Do I have to leave my light switch on?
Yes, VUcam uses power continuously, so you will have to leave the light switch on. We
have provided with your VUcam a “Keep it on” label as reminder to leave the switch on.
Can I use LED bulb with Smart Socket Adapter?
Yes, we recommend that you use an LED bulb.
What is the maximum light bulb wattage I can use with the Smart Socket Adapter?
Smart Socket Adapter supports up to maximum 40W.
My Smart Socket Adapter is “Offline”.
VUcam uses BLE Mesh Network that is capable to provide connections for all devices within
30 feet. Firstly, ensure your Smart Socket Adapter is within this range with the camera. If your
device still looks offline in the device map of VUpoint Home app, please go through the reset
procedures once.
How can I reset my Smart Socket Adapter?
Smart Socket Adapter can be reset through app, you can remove Smart Socket Adapter
and re-add it in app again. Another reset method is to press the on/off button in a designed
sequence. When the light is on, press the light off for 3 seconds then on for 1 second. Repeat
this sequence for three times. After reset, the light bulb will flash for 3 times, please note the
light bulb will not light up once reset is successful.
Smart Socket Adapter
1.
2.
3.
4.
5.
Regulations and Compliance
IMPORTANT SAFETY INSTRUCTIONS
Please adhere to the following safety instructions. Failure to follow the instructions outlined in
the user’s manual may lead to serious personal injury and possible property damage.
SAVE THESE INSTRUCTIONS
Smart Socket Adapter DC power output max. up to 5W.
The Smart Socket Adapter must be installed in the listed lampholder.
Power Cable use only with the Camera Model: OK110KU.
Class 2 output connections are not intended for supporting products or appliances.
Use only the Power Cable packaged with the Camera Model: OK110KU. The Smart
Socket Adapter and Power Cable may become warm during normal use. Always
allow adequate ventilation around the Smart Socket Adapter and Power Cable and
use care when handing. Unplug the device if any of the following conditions exist:
• The Power Cable or Smart Socket Adapter has become frayed or damaged
• The Power Connector or Smart Socket Adapter is exposed to rain, liquid, or
excessive moisture
• The Power Cable or Smart Socket Adapter has become damaged
• You suspect the Power Cable or Smart Socket Adapter needs service or repair
• You want to clean the Power Cable or Smart Socket Adapter
• Class 2 output connections are not intended for supporting products
or appliances
Safety & Operations
15
16
Summary of Contents for VuCam
Page 1: ...USER S MANUAL...
