HRD 92 S.C
PAGE | 15
9
MAINTENANCE & GUARANTEE
9.1
FILTER REPLACEMENT
1
Unscrew the sniffing pipe
2
Remove the filter from the inside of the probe and discard it
3
Insert a new filter into the probe
4
Finally screw the sniffing pipe on the probe
9.2
BATTERY REPLACEMENT
The replacement of the battery pack is done by opening the case of the detector. Only
one VULKAN battery pack must be used.
1
Remove the 4 screws from the box
2
Unscrew the wires from the old battery block of the battery terminal block
3
Screw the wires of the new battery pack in the correct polarity
:
Red wire> te
Black wire > terminal -
4
Close and rescrew the 4 screws of the houssing
FR
