V SERIES PROOFING CABINET
F-41190 (02-16)
10
CLEANING
Always unplug
electrical
power supply before
cleaning.
The Cabinet and its
parts are HOT. Be very careful when
operating, cleaning, or servicing the
cabinet.
DAILY CLEANING:
1.
Unplug electrical power supply.
2.
Allow warmer to cool before
cleaning.
3.
Clean the interior of the cabinet
with a mild soap and water.
Never use harsh chemicals or
abrasive pads to
clean
the
cabinet.
4.
Rinse and dry with a soft dry
cloth.
5.
Clean the exterior of the cabinet
with a clean damp cloth.
HEAT TINT:
Darkened areas, called “heat tint,” may appear on stainless steel exposed to excessive
heat. Excessive heat causes the protective film to thicken. This is unsightly, but is not
a sign of permanent damage.
LOCKOUT / TAGOUT PROCEDURE
Always perform the Lockout / Tagout
Procedure before removing any sheet metal panels or
attempting to service this equipment.
The Lockout / Tagout Procedure is used to protect personnel working
on an electrical appliance. Before performing any type of
maintenance or service on an electrically operated appliance, follow these steps:
1.
In electrical box, place unit’s circuit breaker into OFF position.
2.
Place a lock or other device on electrical box cover to prevent someone from
placing circuit breaker ON.
3.
Place a tag on electrical box cover to indicate that unit has been disconnected for
service and power should not be restored until tag is removed by maintenance
personnel.
4.
Disconnect unit power cord from electrical outlet.
5.
Place a tag on cord to indicate that unit has been disconnected for service and
power should not be restored until tag is removed by maintenance personnel.
