Vulcan-Hart ERC50, Installation & Operation Manual

Page: 4 / 28

— 4 —
ER Series Fryer — Construction Features
Model Filter Ready
Battery Battery
Configuration Interplumbing
ERD50/ERC50 Opt. (Use MF50) Opt. Opt.
ERD85/ERC85 Opt. (Use MF85) Opt. Opt.
Model
Fat Melt
Thermostat Basket Lift(s)
Basket(s)
Cycle Twin Single Tri
ERD50
Std.
Solid State
Opt.
Std. Opt. N/A
ERD85 Digital Display Std. Opt. Opt.
ERC50
Std. Opt.
Std. Opt. N/A
ERC85
Computer
Std. Opt. Opt.
ER Series Fryer — Features
BATTERY CONFIGURATIONS
Batteries of up to four fryers wide can be configured with any ER Series Fryer or ERO Frymate Dump
Station (either 15
1
/
2
" [39 cm] or 21" [53 cm ] wide). Possible configurations showing positions A through
E are depicted below:
NOTES:
= Dump Station; = Fryer.
*Indicates filter interplumbing not available.
A filter dump station can be located under any position in a battery if it has been built without an ERO Frymate.
A filter dump station can be located under any position in a battery if the line-up has been built with an ERO
Frymate located at either end of the battery.
When an ERO Frymate is built between two fryers within a battery, the filter dump station is located under the
ERO Frymate.
In two-unit batteries utilizing an ERO Frymate, the filter dump station will always be located under the fryer.
All options and accessories can be used with batteried equipment.
ERO15 is used on Model ER50.
ERO21 is used on Model ER85.